Kenwood KMR-M312BT Car Satellite TV System User Manual


 
ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
NUMBER DIAL
1
Turn the volume knob to select a number (0 to
9) or character (
*
, #, +).
2
Press
S / T
to move the entry position.
Repeat steps
1
and
2
until you finish entering
the phone number.
3
Press the volume knob to call.
(or using RC-406)
1
Press the number buttons (
0
to
9
) to enter the
phone number.
2
Press
to call.
VOICE
Speak the name of the contact you want to call or
the voice command to control the phone functions.
(
Make a call using voice recognition
)
BATT
*
LOW
/
MID
/
FULL
:Shows the strength of the
battery.
SIGNAL
*
NO SIGNAL
/
LOW
/
MID
/
MAX
:Shows the strength
of the current received signal.
*
Functionality depends on the type of the phone used.
Make a call using voice recognition
1
Press and hold
to activate the connected
phone.
2 Speak the name of the contact you want to call
or the voice command to control the phone
functions.
• Supported Voice Recognition features vary for
each phone. Refer to the instruction manual of the
connected phone for details.
• This unit also supports the intelligent personal
assistant function of iPhone.
Delete a contact
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select [
CALL HISTORY
], then press the knob.
3 Turn the volume knob to select a contact.
4 Press and hold the volume knob to enter delete mode.
5 Turn the volume knob to select [
DELETE ONE
] or [
DELETE ALL
], then press the knob.
DELETE ONE
: Selected name or phone number in step 3 is deleted.
DELETE ALL:
All names or phone numbers in [
CALL HISTORY
] in step 2 is deleted.
6 Turn the volume knob to select [
YES
], then press the knob.
7 Press and hold to exit.
• To return to the previous setting item, press .
• Not applicable for mobile phone that supports PBAP.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [
CALL HISTORY
], [
PHONE BOOK
], or [
NUMBER DIAL
], then
press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone number.
4 Press and hold one of the number buttons (1 to 6).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select [
NUMBER DIAL
] in step 2 and store a blank
number.
Make a call from memory
1
Press to enter Bluetooth mode.
2 Press one of the number buttons (1 to 6).
3 Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
JS_KWD_KMM_BT312U_KN_EN_5.indd 17JS_KWD_KMM_BT312U_KN_EN_5.indd 17 25/9/2014 7:53:43 AM25/9/2014 7:53:43 AM