Filter
Top Products
ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
F/W UPDATE
UPDATE SYSTEM / UPDATE BT
F/W UP xx.xx
YES
:Starts upgrading the firmware.;
NO
:Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
REM SETTING*
(for )
REMOTE ID SET
Remote control ID list is displayed.
YES
:Indicates that this ID is already registered.;
NO
:Indicates that this
ID is available.
Turn the volume knob to select an available ID (
REM ID1/ ID2/ ID3
),
then press the knob to register.
REMOTE ID DEL REM ID1 DELETE/ ID2 DELETE/ ID3 DELETE
: Selects the registered
remote control ID to delete.
YES
:Deletes the selected remote control ID.;
NO
:Cancels.
CLOCK
CLOCK DISPLAY
(For )
ON
:The clock time is shown on the display even when the unit is turned
off.;
OFF
:Cancels.
DATE SET*
2
(For )
DD/MM/YY
:Sets the date for marine remote control display.
*
Displayed only when KCA-RC55MR (optional accessory) is connected. (
29
)
RADIO
Search for a station
1
Press repeatedly to select TUNER.
2 Press repeatedly (or press / on RC-406) to
select FM1/ FM2/ FM3/ AM.
3 Press S/T (or press S/ on RC-406) to search for a
station.
• To change the searching method for S/T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1to6).
• To select a stored station: Press one of the number buttons (1to6) (or
press one of the number buttons (1to6) on RC-406).
Direct Access Tuning (using RC-406) (
for
)
1
Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10seconds after step
2, Direct Access Tuning
is automatically canceled.
JS_KWD_KMM_BT312U_KN_EN_5.indd 5JS_KWD_KMM_BT312U_KN_EN_5.indd 5 25/9/2014 7:53:38 AM25/9/2014 7:53:38 AM