Kenwood KRC-478RV Car Stereo System User Manual


 
the desired language and then the CLK button.
English is #1, French is #2, and German is #3.
Select the type of programme to be received
• Press either the FM or AM buttons repeatedly until the type
of programme you want to listen to.
The selection includes:
Speech (SPEECH)
1. News (NEWS)
2. Current Affairs (AFFAIRS)
3. Information (INFO)
4. Sports (SPORT)
5. Education (EDUCATE)
6. Drama (DRAMA)
7. Culture (CULTURE)
8. Science (SCIENCE)
9. Varied (VARIED)
10. Pop Music (POP M)
11. Rock Music (ROCK M)
12. Easy Listening Music (EASY M)
13. Light Classical (LIGHT M)
14. Serious Classical (CLASSICS)
15. Other Music (OTHER M)
16. Weather (WEATHER)
17. Finance (FINANCE)
18. Children’s programmes (CHILDREN)
19. Social Affairs (SOCIAL A)
20. Religion (RELIGION)
21. Phone In (PHONE IN)
22. Travel (TRAVEL)
23. Leisure (LEISURE)
24. Jazz Music (JAZZ)
25. Country Music (COUNTRY)
26. National Music (NATION M)
27. Oldies Music (OLDIES)
28. Folk Music (FOLK M)
29. Documentary (DOCUMENT)
Music (MUSIC)
(
Speech
.....1~9,16~23, 29,
Music
.....10~15, 24~28)
• You can select the type of programme directly by pressing a
preset button. The buttons are factory-set to the following
type of programmes:
2
Conduct auto seek tuning only on those stations with selected
kinds of programmes.
Press the 38(PTY) button.
The PTY indicator will turn on, and the Programme Type
Selection (PTY) Mode entered.
If you make no key input in 30 seconds, the mode will
automatically turn off.
You cannot use this function whilst the traffic information
function is turned on.
Changing the Display Language to French or German
In the PTY mode, hold down the CLK button for one second or
more to display the name of the language currently used.
If you want to change the language, press the preset button for
NOTE
NOTE
1
Programme Type (PTY) Function
Preset the volume level to be used for traffic information and
news broadcasts.
Tune into the station for which you want to set the volume.
Adjust the volume to the desired level.
Hold down the TI VOL ADJ button for two seconds or more.
The volume level blinks once in the display to indicate that the
data has been stored.
Future traffic information/news broadcasts are heard at the
preset level.
• The volume cannot be lowered by this function during tuner
reception. The volume is only set when it is louder than the
listening volume of the tuner.
• You can arrange only to listen to traffic information or news
bulletins with at preset volume with the volume set at
minimum.
NOTE
3
2
1
Presetting Volume for Traffic Information/News
RDS features
— 12 —
English