Filter
Top Products
Rewinds to the beginning of the current track (or fast forwards
to the beginning of the next track), continuing tape playback.
Rewinding tape to the beginning of current track:
Press the 4 button, and the tape will rewind to the beginning
of the current track and automatically start playing again.
To advance to the beginning of the next track:
Press the ¢ button, and the tape will advance to the
beginning of the new track and automatically start playing
again.
The tape advance function "knows" where a track begins by
detecting the blank space preceding it (i.e., the space between
tracks). However, when the blank space lasts for less than 4
seconds or contains noise, this function may not operate
correctly. Furthermore, sections recorded at low levels may
trigger the function if they last for 4 seconds or more.
NOTE
Tape Advance
Automatically fast forwards to the beginning of the next track
when long blank spaces (10 seconds or more) are detected,
continuing tape playback. This function is on, when unit is first
powered on.
Turning Blank Skip Function On/Off:
Press the B.S button to switch the blank skip function on and
off.
"BS ON" is displayed when the blank skip function is turned on.
• If the blank space contains hiss noise, the blank skip function
may not work correctly.
• Sections recorded at low levels may trigger the blank skip
function if they last for 10 seconds or more.
NOTE
Blank Skip
Fast Forwarding Tapes:
Press the FM button.
Rewinding Tapes:
Press the AM button.
Cancelling:
Press the 23 button.
Normal tape play returns.
Fast Forwarding and Rewinding Cassette Tapes
Loading and Playing Cassettes:
Load a cassette with the tape exposed on the right.
The tape starts playing automatically.
Playing Cassettes Already Loaded:
Press the SRC button repeatedly until tape mode is obtained.
"TAPE" is displayed when the tape mode has been selected.
Listening to the other side:
Press the 23 button.
Tape play switches to the other side.
Stopping and Ejecting Cassettes:
Hold down the 23 button for one second or more.
The tape stops playing and the cassette ejects.
• Remove a cassette from the unit when not listening to it for a
whilst. If you leave it in the unit too long, the tape may stick to
the tape head and cause the unit to malfunction.
• The tape counter is not exact, but only represents an
approximation of the elapsed time.
NOTE
Playing Cassette Tapes
Cassette player features
— 14 —
English