Filter
Top Products
TEL MUTE
P.CONT.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
EXT. CONT
NON-FAD
English
— 40 —
Connecting Cables to Terminals
Front left output (White)
Front right output (Red)
Non-fading right output (Red)
(KRC-PS978R only)
Rear right output (Red)
Rear left output (White)
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Orange/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right (
+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
KENWOOD disc changer/DAB control input
Battery cable (Yellow)
Ignition cable (Red)
FM/AM
antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO)
(Accessory3)
To connect the Disc changer or DAB unit,
consult each manual.
NOTE
Wiring harness
(Accessory1)
If no connections are
made, do not let the cable
come out from the tab.
NOTE
Connect to the terminal
that is grounded when
either the telephone rings
or during conversation.
Power control/
Motor antenna
control cable
(Blue/White)
Connect either to the
power control terminal
when using the optional
power amplifier, or to the
antenna control terminal in
the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector B
Fuse(10A)
Connector A
TEL mute cable (Brown)
To connect the KENWOOD
navigation system, consult
your navigation manual.
NOTE
External amplifier
control cable
(Pink / Black)
To "EXT.AMP.CONT."
terminal of the amplifier
having the external amp
control function.
Non-fading left output (White)
(KRC-PS978R only)
Non-fading right output
(Red) (KRC-878R only)
Non-fading left output
(White) (KRC-878R only)
A–7 Pin (Red)
A–4 Pin (Yellow)
Battery cable
(Yellow)
Ignition cable
(Red)
for Volkswagen car
for Volkswagen car
To Power Control terminal
Special antenna cable
(commercially available)