Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
54
12 OPERATOR CONVENIENCES
■ Sending Messages
1 Select SSB, FM, or AM.
• Use the same mode for transmitting and
receiving.
2 Press [VOX] to switch VOX ON or OFF.
• Depending on this selection, the subsequent
procedures differ.
3 If you switch OFF VOX in step 2, press [SEND],
or press and hold Mic [PTT].
4 Press [CH 1], [CH 2], or [CH 3], depending on
which channel you want to use.
• For example, “AP 1– –” appears while
playing back the message in channel 1.
• To interrupt playback, press [CLR].
5 To play back another message in sequence,
press the corresponding [CH 1], [CH 2], or
[CH 3] while playing back the first message.
• Up to three channels can be queued at the
same time.
6 If you press [SEND] or Mic [PTT] in step 3, press
[SEND] again or release Mic [PTT].
■ Changing Inter-message Interval
For repetitive message playback, you can change
the interval between each series of messages. Use
Menu No. 24, and select the time in the range of 0 to
60 seconds.
■ Changing Volume
Turning the AF control does not change the volume
for playback. To change the volume, use Menu
No. 25.