Filter
Top Products
112
21 APPENDIX
Note:
If you are using a PC with a communication program to control this built-in TNC, prepare the RS-232C cable (straight) for connecting to the COM
teminal on the transceiver. Then, set the same communication speed by accessing Menu No. 56. Select the same communication speed and the
communications parameters. They must be set 8-bit, 1-stop bit, Non-parity, except for 4800 bps. The 4800 bps is also used for the Quick Data
Transfer function {page 80} and the communication parameters are fixed as 8-bit, 2-stop bit, Non-parity format.
dnammoC
emaN
trohS tluafeD retemaraP noitpircseD
EMITTOLSLS3 052~0
slavretninoitarenegrebmunmodnarfodoirepehtseificepS
ehtfotinuehT.dohtemEMITTOLS/TSISREPehtrof
.sdnocesillim01siretemarap
ECARTCARTFFOFFO/NO
stekcapdeviecerllayalpsidotCNTehtsesuac,NOnehW
.yteritneriehtni
SEIRTIRT0 51~0
nidemmargorpseirternoissimsnartforebmunehtseificepS
.retnuocyrtereht
YALEDXTXT05021~0
fotratsehtdnaNOTTPneewtebyaledemitehtseificepS
.sdnocesillim01siretemarapehtfotinuehT.noissimsnart
OTORPNU
U
QC
AIV(1llaC
,3llac,2llac
)9llac...
.edomlocotorpnUnitekcapadnesotsngisllacseificepS
era9llacot2llaC.noitanitsedehtfongisllacehtsi1llaC
.hguorhtdetaepigidebotsnoitatsfosngisllac
WOLFXXNOFFO/NO
,NOnehwlortnocwolferawtfosmrofrepotCNTehtsesuaC
.FFOnehwlortnocwolferawdrahro