Filter
Top Products
48
10 SUB-RECEIVER
AUTOMATIC SIMPLEX CHECK (ASC)
You can also use ASC functions on the 144 MHz and
430 (440) MHz bands of the sub-receiver. While
using a repeater, ASC periodically monitors the
strength of the uplink frequency to check the signals.
Press and hold [TF-SET] until “[R]” appears on the
SUB band display. Refer to “AUTOMATIC SIMPLEX
CHECK” {page 34} for function and control details.
TRANSMITTING A TONE
You can assign another Tone to the sub-receiver.
Refer to “TRANSMITTING A TONE” {page 33} for
function and control details.
MEMORY
You can also utilize all the memory functions {page 58},
including the Quick Memory function {page 64}, while
you are operating the sub-receiver. However, the
operating frequency range is limited to the sub-
receiver’s frequency coverage. You cannot recall any
memory channels that are outside the sub-receiver’s
frequency coverage. These channels are automatically
skipped when they are recalled on the sub-receiver.