Kramer Electronics 123V Car Amplifier User Manual


 
KRAMER ELECTRONICS LTD.
11
3)
For the name of the nearest Kramer authorized service center, consult your
authorized dealer.
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular
purpose, are limited in duration to the length of this warranty.
EXCLUSION OF DAMAGES
Kramer’s liability for any defective products is limited to the repair or replacement of the
product at our option. Kramer shall not be liable for:
1)
Damage to other property caused by defects in this product, damages based upon
inconvenience, loss of use of the product, loss of time, commercial loss; or:
2)
Any other damages, whether incidental, consequential or otherwise. Some
countries may not allow limitations on how long an implied warranty lasts and/or
do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which
vary from place to place.
NOTE
: All products returned to Kramer for service must have prior approval. This may be
obtained from your dealer.
NOTICE
This equipment has been tested to determine compliance with the requirements of:
EN-50081
: "Electromagnetic compatibility (EMC);
generic emission standard.
Part 1: Residential, commercial and light industry"
EN-50082
: "Electromagnetic compatibility (EMC) generic immunity standard.
Part 1: Residential, commercial and light industry environment".
CFR-47
FCC Rules and Regulations:
Part 15- “Radio frequency devices:
Subpart B- Unintentional radiators”
CAUTION!
Servicing the machines can only be done by an authorized Kramer
technician. Any user who makes changes or modifications to the unit without
the expressed approval of the manufacturer will void user authority to operate
the equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to
other components.