Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a VM-2HDCP 1:2 DVI Distributor
6
Table 1: VM-2HDCP 1:2 DVI Distributor Features
#
Feature
Function
1 12V DC +12V DC connector for powering the unit
2 OUTPUT1 DVI Connector Connect to the DVI acceptor 1
3 OUTPUT2 DVI Connector Connect to the DVI acceptor 2
4 INPUT DVI Connector Connects to the DVI source
5 INPUT LED Lights when the input is active; blinks when the input is not valid
6 OUT 1 LED LED lights when OUTPUT 1 is connected and active; LED blinks
when selecting the EDID (see section
5.1)
7 OUT 2 LED LED lights when OUTPUT 2 is connected and active; LED blinks
when selecting the EDID (see section
5.1)
8 ON LED Lights when the unit is powered
9 EDID Button Press to read the EDID of the selected display (see section 5.1)
5 Connecting a VM-2HDCP 1:2 DVI Distributor
To connect the VM-2HDCP as illustrated in the example in Figure 4, do the
following:
1. Connect a DVI source (for example, a host computer) to the INPUT
connector.
2. Connect the OUTPUT connectors
1
OUTPUT 1 connector to DVI acceptor 1 (for example, a
projector)
to one or both DVI acceptors, as
follows:
OUTPUT 2 connector to DVI acceptor 2 (for example, a display)
3. Connect the 12V DC power adapter (wall transformer) to the 12V DC
socket and connect the transformer to the mains electricity.
4. Acquire the EDID (see section
5.1).
1 Both outputs do not need to be connected