Filter
Top Products
Connecting a VM-2HDCP 1:2 DVI Distributor
7
7
Figure 4: Connecting a VM-2HDCP 1:2 DVI Distributor
5.1 Acquiring the EDID
Initially, the VM-2HDCP operates with the factory default EDID
1
You can acquire:
. This lets
you connect the power before connecting either of the acceptors or the
source.
• The Default EDID (both output LEDs blink)
• The EDID from One Output (the relevant output illuminates)
You can also acquire the Clone EDID which copies the EDID data from the
acceptor bit-by-bit.
1 The VM-2HDCP reads the EDID, which is stored in the non-volatile memory