Filter
Top Products
18. SETTING THE TIME TABLE PROGRAM
30
31
1
Press the [SELECT] button and
position the " " over the "TIME
TABLE PROGRAM" mark.
At that moment, the flashing digit
indicates "Program No.".
(The flashing means it can be changed.)
Setting program No. 1
(1) Set the "Day of the week".
Press the [SET] button. At that moment,
the flashing changes from the "Program
No." to the "Day of the week".
In case of example, press th
e[CHANGE]
button to set at "8". And then press the
[SET] button. At that moment, the
flashing changes
from the "Day of the
week" to the "Action".
The time table program function allows special mark "*" printing, an External Time Signal
and a Built-in Buzzer. These functions can be programmed for each day of the week and
each time period.
Example 1: The time table program is explained using the following example.
SELECT CHANGE SET
TIME TABLE
PROGRAM
Special mark "*"
OFF
Monday
to Friday
Special mark "* " ON
Special mark "*"
OFF
0:00 9:00 0:0017:30
The following is time table based on the case above.
• Special mark "*" isn't printed for the time period with no program setting.
• Up to 48 programs can be set (Program No. 1 through No. 48).
Program No.
01
02
Day of the week
Mon. - Fri.
Mon. - Fri.
Time
9:00
17:30
Special mark "*"
ON
OFF
Action
Day of the week
Print example: Special mark
JAN 31 8:30
JAN 31 10:00
*
Program No.
2
SELECT CHANGE SET
TIME TABLE
PROGRAM
1.
2.
3.
4.
5.
Day of the week
Monday only
Tuesday only
Wednesday only
Thursday only
Friday only
Day of the week
Saturday only
Sunday only
Monday to Friday
Monday to Saturday
Every day
6.
7.
8.
9.
10.