Filter
Top Products
32
33
3
Setting program No. 2
Press the [CHANGE] button twice. At
that moment, the display changes to
the following figure.
Make settings for Program No.2 in the
same manner as for Program No.1, as
illustrated in the following figure, and
press the [SET] button.
MO TU WE TH FR SASU
SELECT CHANGE SET
TIME TABLE
PROGRAM
Example 2: The time table program is explained using the following example.
0:00 9:00 0:0017:3012:00
• Up to 48 programs can be set (Program No. 1 through No. 48).
Program No.
01
02
03
04
Day of the week
Mon. - Sat.
Mon. - Sat.
Mon. - Sat.
Mon. - Sat.
Time
9:00
9:00
12:00
17:30
Monday
to Saturday
Ext. Signal
&
Built-in Buzzer
Ext. Signal
ON
Built-in Buzzer
ON
Ext. Signal Built-in Buzzer
4
After you finish setting the time table
program, press the [SET] button once
again.
Now the time table program setting
has been completed. Replace
the cover and lock.
Important: If you do not complete Step
4, the Time Recorder will not print.
MO TU WE TH FR SASU
BUZZ EXT.
SIGNAL
*OFF *ON
SELECT CHANGE SET
TIME TABLE
PROGRAM