Open as PDF
ASSEMBLING AND PREPARING
Setting Up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center
or other furniture.
Attaching the Stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
M4 x 14
M4 x 14
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
(For 32/37/42LT670H, 32/37/42/47LT770H)
Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not fasten the screws with too much
force; otherwise they may be worn out
and get loosened.
Tighten the two of
these four screws and
the two Torx plus star
(provided as parts of the TV) to secure the TV.
Tighten the two Torx plus star head screws with
a star head driver bit (not provided as parts of