Open as PDF
ASSEMBLING AND PREPARING
Mounting on a Table
Lift and tilt the TV into its upright position on a
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
Connect the power cord to a wall outlet.
Do not place the TV near or on sources
of heat, as this may result in fire or other
Adjusting the angle of the TV to suit view
(For 26/32/37/42LT670H, 32/37/42/47LT770H,
Swivel 90 degrees to the left or right and adjust
the angle of the TV to suit your view.
The swivel angle is adjustable. The default swivel
angle is 20°. Attaching a screw to the
on the bottom of the stand will allow a swivel
angle range of 45°. Attaching a screw to the
position will allow a swivel angle range of 90°.
Only one swivel screw is included and
attached to position C.
When adjusting the angle of the TV, watch
out for your fingers.
- Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
Removing the swivel fixing screw will allow
the set to rotate 360°.