Filter
Top Products
12
206-4261
The Express Script Installer Menu Wizard guides you through the process of setting up the essential
items for most hospital TV viewing applications and also enables you to congure the Pro:Centric
settings on the TV. The wizard will appear on the screen each time the TV is turned ON, until
conguration is completed or the wizard is exited. Use the Installer Remote to make selections and
complete each wizard step.
Before You Begin
• If you plan to create a customized Master TV Setup using the procedure described on pages
31 to 35 or use a TLX le for cloning or FTG Mode conguration purposes, be sure to exit the
Express Script in order to avoid setup conicts that may cause the TV to malfunction. The
Express Script Installer Menu Wizard is intended for individual TV setup or TLL cloning only.
• If it has been completed or exited and therefore does not display, the Express Script Installer
Menu Wizard can be reactivated; however, this requires that you perform an “IN-STOP” to
restore factory defaults on the TV(s). See Reference section, “Restoring Factory Defaults on
the TV(s),” for further information.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if
applicable, the LAN cable during the conguration process, as doing so may
interrupt the current step and/or corrupt the conguration data.
Initiate Conguration or Exit the Express Script Installer Menu Wizard
Note: If you bypass the Express Script, pillow speaker functionality will not be
enabled unless you set Installer Menu item 027 HOSPITAL MODE appropriately. See
the “Installer Menu” section of this document for further information.
Select Express Script to continue
Installer Menu Wizard
Use the Express Script to set up the TV
Exit
OK
PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279
Express Script
From the Express Script launch screen, you have the following options:
• To proceed with the Express Script Installer Menu Wizard, use the Up/Down arrow keys on the
Installer Remote to select/highlight Express Script. Then, press OK on the Installer Remote.
Note: You can select the “Express Script” option if you want to congure Pro:Centric settings
on this TV, even if you do not intend to complete the TV conguration using the Express Script.
After you congure the Pro:Centric settings, you will have the option to exit the remainder of the
wizard, if desired.
• To exit the wizard without completing any conguration, use the Up/Down arrow keys on the
Installer Remote to select/highlight Exit and press OK. In the conrmation pop-up window,
select OK, and then press OK once more on the Installer Remote.
Express Script Installer Menu Wizard