Filter
Top Products
23
206-4261
Item Function Value Range Default Value Brief Description of Function
000 INSTALLER SEQ 0 ~ 3 0 Leave default set to 0.
001 POWER MANAGE 0 ~ 7 0 Sets number of hours of no activity before automatic shutoff.
002 AC ON 0 / 1 0 Set to 1 to enable TV to turn ON when AC power is applied.
003 BAND/AFC 0 ~ 3 1 Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC
004 STRT CHANNEL 0 ~ 127, 255 255
Channel tuned when TV is turned ON. (Set to 255 to tune to channel tuned
before TV turned OFF.)
005 CHAN LOCK 0 / 1 0 If set to 1, cannot tune from current channel.
007 STRT VOLUME 0 ~ 63, 255 255
Volume level when TV is turned ON. (Set to 255 to use volume level before
TV turned OFF.)
008 MIN VOLUME 0 ~ 63 0 Sets minimum allowable volume setting.
009 MAX VOLUME 0 ~ 63 63 Sets maximum allowable volume setting.
010 MUTE DISABLE 0 / 1 0 Set to 1 to disable Mute Function.
011 KEY DEFEAT 0 / 1 1
If set to 1, joystick button menu navigation functions on display panel are not
available.
012 IR BANKS EN. 0 / 1 0 Set to 1 to enable TV to respond to bank discrete IR codes.
013 SCAN MODE 0 / 1 1 Set to 1 to allow Channel Up/Down to turn ON TV. (See detailed descriptions.)
014 STRT CH IN SM 0 / 1 0 Set to 1 to use the Start Channel for the Channel Map pivot point in Scan Mode.
015 SLEEP TIMER 0 / 1 1 Set to 1 to enable Sleep Timer.
016 EN TIMER 0 / 1 1 Set to 1 to enable On/Off Timers.
017 ALARM 0 / 1 1 Set to 1 to enable Alarm.
020 FEATURE LEVEL
0 ~ 1, 16 ~ 24,
64 ~ 65
1 Determines an additional IR code scheme to which the TV will respond.
021 V-CHIP 0 / 1 1 Set to 1 to enable V-Chip (Parental Control) functions.
022 MAX BLK HRS 0 ~ 99 12 Sets number of V-Chip blocking hours.
023 CAPTION LOCK 0 / 1 0 Set to 1 to retain caption setting before TV turned Off.
025 FUNCTION PRE. 0 ~ 1 1
Set to 1 to allow Channel Preview/Banks Setup Menu access via CH
PREVIEW key on Installer Remote.
027 HOSPITAL MODE 0 ~ 162, 254 254
Set according to the speaker selection, the pillow speaker code/supply voltage,
and the hospital IR code. See detailed instructions.
028 CH. OVERIDE 0 / 1 1
If set to 0, user access to channel settings in the TV setup menus is restricted
and users can only tune to channels that are included in the channel lineup.
029 OLD OCV 0 / 1 0
Set to 1 to remap the PTC’s direct tune channels for Aux inputs from 13x to 9x.
030 ACK MASK 0 / 1 0 If set to 1, enables ACK feature of MPI.
031 POLL RATE 20 ~ 169 94 Selects poll rate for MPI.
032 TIMING PULSE 186 ~ 227 207 Sets baud rate for MPI.
035 HDMI1 ENABLE 0 ~ 2 1
Set to 0 to disable HDMI 1. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 1.
039 REAR AUX EN 0 / 1 1 Set to 1 to enable display panel Video 1 input jack.
041 SIMPLINK EN 0 ~ 3 0
Determines the status of the SIMPLINK feature. (See detailed descriptions.)
042 AUTO INPUTS 0 ~ 255 0
Determines the Aux inputs for which auto-sensing is enabled. (See detailed
descriptions.)
046 STRT AUX SRCE 1, 3 ~ 5, 255 255 Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
047 AUX STATUS 0 / 1 0
Set to 1 for MPI Aux source to be reported as a channel number instead of
Channel 0.
Installer Menu Items 000 through 047
Installer Menu (Cont.)