Filter
Top Products
37
206-4163
Reference: TV Camport Auto Sense Operation
The Camport Auto Sense function is enabled when:
1. Installer Menu item 034 CAMPORT EN is set to 1 AND
2. Installer Menu item 040 AUTO CAMPORT is enabled (1).
Selectable: Can be accessed with INPUT key, direct
access, etc.
Auto Sense: TV switches to this input when connector is
inserted. The Camport (Side [AV IN 2] Video) has the
highest priority and will override any commands including
tuning to the Start Channel.
CAMPORT (Side Video) Functionality Control
Item 034
CAMPORT EN
Item 040
AUTO CAMPORT
Side (AV IN 2)
Video Operation
0 0 Disabled
0 1 Disabled
1 0 Selectable
1 1 Auto Sense
Camport Operation (Stand-alone)
When Camport Auto Sense is enabled as above, the TV’s
source will switch to the Side (AV IN 2) Video Aux source
whenever a plug is inserted into the AV IN 2 Video input.
When the plug is removed, the TV will switch back to the
previous channel or input source that was being displayed
before the plug was inserted. However, if any direct access
to an RF channel or Aux channel is requested while the
Camport is active, then, when the video plug is removed,
the TV will switch to the last requested channel. Source
changes using any Source keys (INPUT) are ignored.
Channel Up/Down and Flashback commands are not direct
access tuning commands, and they are also ignored.
Previous State
Before Inserting
CAMPORT
Operation While
CAMPORT is
Active
State Upon
Removal of
CAMPORT
Aux or RF
Channel
None
Previous Aux
or RF Channel
Aux or RF
Channel
Direct Access
Last Requested
Aux or RF Channel
Aux or RF
Channel
Ch Up/Down,
Flashback, and
Input Keys
Previous Aux
or RF Channel
Camport Operation (FTG or PPV)
The operation will be similar to that of the Stand-alone
Mode. However, when the Channel Map is maintained
external to the PTC (i.e., FTG and PPV), Channel Up/
Down or Flashback keys are sent as Direct Access tuning
commands to the PTC/TV.
Previous State
Before Inserting
CAMPORT
Operation While
CAMPORT is
Active
State Upon
Removal of
CAMPORT
Aux or RF
Channel
None
Previous Aux
or RF Channel
Aux or RF
Channel
Direct Access
Last Requested
Aux or RF Channel
Aux or RF
Channel
Ch Up/Down,
Flashback, and
Input Keys
Last Requested Aux
or RF Channel