Filter
Top Products
8
206-4118
Installer Overview
This is the Commercial Mode Setup guide only.
Operating Installer Menu
To set up the controls for the TV, you will need to know how to
enter the TV Installer Menu and make changes to the default
values as required. If necessary, familiarize yourself with the
TV Installer Menu and how to make and save changes in the
menu.
LG Installer Remote Control
You will need an LG Installer Remote similar to the one shown to
the right. The Installer Remote must have a SOURCE button or
its equivalent. The remote shown in this manual has an INPUT
button, which serves the purpose of a SOURCE button.
The TV’s clonable features need to be set up. This is a critical
step. If the Master TV display panel’s clonable features, such
as adding channel icons or channel labels, are not done cor-
rectly, the cloned TVs will all have problems. Refer to the
Owner’s Manual for information on other TV features: Video,
Audio, Closed Captions, V-Chip, etc.
TLL-1100A Clone Programmer
The TLL is a very simple cloner to use. It can be
set up to clone a Master TV Setup and transfer it
into a Target TV. Cloning is accomplished using
the TV/cloner MPI ports for communication.
Ensure the Master TV is set up completely.
Cloning is only possible when the TV is tuned to
an Aux source or an analog channel (not a digi-
tal channel).
Typical Installer Menu
TV Link
Loader-Demo
TLL1100A
Ready
TLL1100A
ENTER
RECEIVE SEND
MENU
MODE
MENU
LIST
123
456
78
0
9
FLASHBK
MUTE
VOL
CH
P
A
G
E
RETURN
MARK
ENTER
INPUT
POWER
RATIO
CC
TIMER
ALARM
SAP
EJECT
XXLH250H INSTALLER MENU
000 INSTALLER SEQ 000
UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00