Filter
Top Products
PREPARATION
9
Connections
Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the
DVD/CD receiver
. Use one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
–
Make sure the DVD/CD receiver is connected directly
to the TV. Select the correct AV input on your TV.
– Do not connect your
DVD/CD receiver
to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
Video connection
11
Connect the MONITOR OUT jack on the DVD
Receiver to the video in jack on the TV using the
video cable supplied (V).
22
Connect the Left and Right AUDIO OUT jacks of
the DVD/CD Receiver to the audio left/right in jacks
on the TV (A) using the audio cables.
S-Video connection
11
Connect the S-VIDEO OUT jack on the DVD/CD
receiver to the S-Video in jack on the TV using the
S-Video cable (S).
22
Connect the Left and Right AUDIO OUT jacks of
the DVD/CD receiver to the audio left/right in jacks
on the TV (A) using the audio cables.
Component Video (Color Stream
®
) connection
11
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks on the DVD/CD
receiver to the corresponding in jacks on the TV
using an Y Pb Pr cable (C).
22
Connect the Left and Right AUDIO OUT jacks of
the DVD/CD receiver to the audio left/right in jacks
on the TV (A) using the audio cables.
Progressive Scan (ColorStream
®
pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD/CD
receiver’s progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD receiver.
11
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks on the DVD/CD
receiver to the corresponding in jacks on the TV
using an optional Y Pb Pr cable (C).
22
Connect the Left and Right AUDIO OUT jacks of
the DVD/CD receiver to the audio left/right in jacks
on the TV (A) using the supplied audio cables.
ote
– Set the Progressive to “On” on the setup menu for
progressive signal, see page 17.
Connecting to a TV