Filter
Top Products
4
Before Installation
* Do not use this product for purposes other than to attach the TV to the wall.
* Be careful when installing and using the wall-mounted TV to prevent product damage and safety hazards.
* If the instructions in the manual are unclear, stop the installation and contact the service center. If you are still having problems understanding
the instructions after contacting the service center, seek a professional to install the product for you.
* An individual with experience in mechanical and architectural fields may not have any difficulty understanding this manual or installing the
product, even if they are not a professional.
* This product is designed to be mounted onto walls with a standard amount of space between the studs. LG Electronics is not responsible for
any issues resulting from the product being mounted on walls that do not have the appropriate amount of space.
* Install the wall mounting screws to the wall in the center of the studs at both ends. It is recommended to use the stud finder, which is optional
and not included with this product.
* When installing the bracket on a concrete wall, or on any other walls capable of holding the strength specified in the manual, you may remove
the brackets for mounting the product onto the wall with studs that have the standard amount of space and then follow the instructions for
attaching the brackets to make the installation easier.
* Only install the bracket on vertical walls. Do not install the bracket on an angled wall or on the ceiling. LG Electronics is not liable for problems
that occur as a result of installing the product on a slanted wall or on the ceiling.
* Check that the accessories provided with the product are all included before installing. LG Electronics is not liable for any damage or loss of
the accessories after the package has been opened.
* Make sure that the accessories are kept out of the reach of children to prevent safety hazards, such as choking from swallowing any small
parts.
* Make sure that the screws are tight. Applying excessive force to screws may damage to the wall, affect the product performance, or cause it
to become damaged.
* Make sure that the installed TV does not exceed the specified tension load and that no external force is applied to it.
* In order to prevent any accidents, take care when handling tools during the installation.
Tools for Installation
Philips screwdriver, 8 mm spanner, drill, and Ф 8 mm drill bit for concrete walls, Ф 4 mm drill bit for wood or steel, level, stud finder, and slotted
screwdriver.
Installation
1
Attaching the Guide Spacer to the TV
- If the screws are not fully tightened when you fix the guide spacers, check the length of the screws and refer to the technical service
manual.
How to attach the Guide Spacers
1. Remove any screws that have been installed into the mounting holes.
2. Fix the guide spacers and the guide spacer screws in order as illustrated.
- Place the TV on a table with the screen facing down. Make sure that you place it on a flat surface covered with a soft cloth or cushion to
protect it from scratches.
- Tighten the screw until the TV, the guide spacers, and the screws are attached securely.
- Use a Philips screwdriver (manual or drill) to tighten the screws.
Guide Spacer (Bottom)
Guide Spacer (Top)
Guide Spacer (Bottom) Fixing Screw
Guide Spacer (Top) Fixing Screw