Filter
Top Products
8
6
Assembling the Wall Mounting Supporter and the Canvas Speaker
- Two or more people are needed to install the product.
1. Place the Canvas Speaker on the wall mounting supporter attached to the wall in the direction of the arrows.
- Attach the guide tape above the left and right holes of the wall mounting supporter and the left and right guide spacers of the Canvas
Speaker.
- Attach the guide tape side by side, as shown in the illustration, and then install the product. When the installation is complete, remove the
guide tape.
- Make sure that the product is fixed securely by lightly pulling on the upper part of the Canvas Speaker.
- If the product is not level after the installation, make it level by moving the Canvas Speaker left and right.
2. Install the wall mounting bracket using the wall mounting screws.
Installation Guide Tape
Wall Mounting Screw