Filter
Top Products
- 16
TV menu
Call up TV menu.
MENU
INFO
END
Settings
Connections
Sound
TV menu
Picture
You will fi nd a description of the picture and sound settings on page 14. The TV
menu offers other settings for the TV set and for connected devices.
Select devices to be connected under “Connections”:
For example video recorder, DVD player/recorder, camcorder/digital camera or
Pay-TV decoder.
Select the connection (AV1, AV2
(1
or AVS) to which you want to connect the
device.
Confi rm with OK.
Select the device type , e.g. DVD and the signal type CVBS in the list which
appears.
Confi rm with OK.
Specify which colour standard (e.g. PAL) the connected device transmits the
signal with. Note: The signal cannot always be displayed correctly when the
“Colour standard Automatic” is selected.
Confi rm with OK.
Other settings under ”Connections”
”RGB insertion yes” (via AV1) to play RGB signals e.g. from a games console
on all channel positions.
”Switching voltage yes” so that the picture is immediately visible on the
screen when playing back from a video device connected to the EURO-AV
socket.
(1
AV2 is not available in DVB-T models.
1.
2.
3.
4.
5.
6.
7.
8.
Modes of operation
Under “Settings“ you will fi nd the following functions:
Channels
• Automatic search • Manual settings • Change
Parental lock
If you do not want your children to be able to use the TV unsupervised, activate
the parental lock by entering a four-digit access code. You can change or delete
this access code in the ”Parental lock” menu (see also page 28).
Switch the set to stand-by after entering the access code or switch it off with
the On/Off button (mains voltage). When switching on the set only shows a
picture when you enter your access code.
Timer functions
You can have your TV switch off at pre-programmed times or wake
you/remind you with radio or TV. If you are not present at the time, a safety
prompt makes sure the TV switches off again after 5 minutes.
• TV off once only • One-time reminder • Wake up (Mo - Su)
• Wake up with TV or Radio • Wake up volume
Time and date
When you receive teletext, the correct date and time setting is picked up by the
set automatically. The time is for information for timing services, e.g. alarm. If
you do not receive teletext you have to set the date and time manually.
Use the numeric buttons on the remote control and the arrows to move
from one digit position to the next.
In the time and date menu you can also set when you want the TV set to auto-
matically start and end daylight saving. You can also set a deviation UTC.
Language
You can set the language in which the menus are displayed under Settings
- Language.
If “your“ menu language is not set, you may have to select the “Language“
menu in a language you cannot understand:
Press the INFO key while no menu is displayed. The index appears.
Select the fi rst entry on the fi rst page (1/2), if it is not selected automatically.
Confi rm with OK.
You are now in the language menu and can select your language and enter it
with ”OK”.
1.
2.
3.
Downloaded From TV-Manual.com Manuals