Filter
Top Products
9
7
Place the new amplifi er assembly
(part #0016875) where the old one
was. Follow the same steps as above,
but backwards 6 to 1. Remove the
serial number from the faulty amplifi er
assembly (as shown in picture above)
and place on the new amplifi er
assembly. Power up the SWA1801z and
relish in the fact that you just replaced
an amplifi er assembly. Hats off to you for
a job well done!
8
Important:
The faulty amplifi er
assembly needs to be returned to LOUD
Technologies. The address should
be on the return shipping label that
was provided with the new amplifi er
assembly. If not, the return address is at
the top of this page. Also, please write
the order number and service request
number (ex: 1046256-1203935) in big,
black, bold numbers on the outside of
the box. This helps expedite the return.
Amp assembly replacement continued:
6c
The led pcb cable attaches to the
connector (as shown in picture above)
with the white cable closest to the edge
of the amplifi er assembly.
3