Filter
Top Products
4
Basic Operation
Turning the Unit On and Off: Push the Power button.
Selecting Play Source: Push the Mode button to choose a play source:
Radio, Sirius Satellite Radio (if equipped), CD, External CD Changer (if
equipped or Auxiliary Sources (if equipped).
Dimming the Display: Push and hold the LOUD button to dim the backlight
of the display. Push and hold again to return to normal illumination.
Preset AM/FM Radio Stations
AM/FM Radio Operation
AM/FM Bands: Push BAND button to select a radio band: F1, F2, F3, AM1,
AM2 or W (weather band).
Manual Tuning:
1. Rotate the
TUNE
knob left or right and hold until “MANUAL”
appears
in the display, then release knob.
2. Rotate the TUNE knob again left or right until the desired radio sta-
tion appears in the display.
Scan Tuning:
Push the
TUNE
knob to have the radio automatically scan
every 5 seconds for a different radio station. To stop scanning push the
TUNE
knob again.
Seek Tuning:
Rotate the
TUNE
knob left or right, then release to seek for a
different radio station.
POWER
MODE AS/PS
LOUD MUTE
DIM / II
BAND W-BND
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
Programming AM/FM Radio Stations: You can program up to 15 FM radio
stations and 10 AM radio stations.
1. Select from F1, F2, F3, AM1 or AM2 by pushing the BAND button
repeatedly.
2. Tune to the desired radio station (see AM/FM Radio Operation above
for more details).
3. Push and hold one of the five STATION RECALL buttons
until a short "beep" is heard. The corresponding preset
button number now appears in the lower right hand cor-
ner of the display.
4. To program additional preset stations, repeat this procedure using the
other STATION RECALL buttons.
BAND W-BND
2
3
4
5
MEMORY
REPEATPROGRAM
SHUFFLE
INTRO
M9900CDS-UM 4/26/06 14:21 Page 4