Filter
Top Products
Remote Control Functions
1. Mute: Push to "Mute" the volume.
2. : Press this button to select between
a Mirror or Normal screen image.
: Press this button to flip the screen
image vertically.
3. POWER: Press this button to turn the
unit "On" or "Off".
4. MENU: Press this button to select a
desired menu.
5. MODE (Picture Mode): Press to select
between Personal, Standard, Soft, Vivid
and Light picture settings.
6. LANG (Language Mode): Press to select
display language.
7. POWER: Press this button to turn the
unit "On" or "Off".
8. CH : Press these buttons to scroll
through a menu Up or Down.
9. CALL: Press to close the menu.
10. TIMER: Press to select the
shut off time.
When the timer expires the monitor will
automatically shut off.
11. SEL: Press this button to select a video
sources (CAM1, CAM2, CAM3 and DVD).
Note 1: When the left turn signal is acti-
vated CAM1 (left side view camera) is
selected automatically.
Note 2: When the right turn signal is
activated CAM2 (right side view camera)
is selected automatically.
Note 3: When the vehicle is put into
reverse CAM3 (rearview camera) is
selected automatically.
12. SYS: Press to select PAL, AUTO, N443
or N358.
MUTE POWER
MODE
CALL
1
7
8
9
10
11
12
CH
MENU
CH
TIMER
LANG
SYS
SEL
2
3
4
5
6
4
General Operation
Turning the Monitor On:
The monitor is operational by activating the ignition
key then manually pressing the power switch on the
unit.
Adjusting the Brightness
Press the buttons on the monitor to adjust the
brightness of the monitor.
Brightness
Up
Brightness
Down