Filter
Top Products
General Operation
Camera View Selection and A/V Input:
Left Side Camera:
The left side view camera (CAM1) is designed to
automatically turn on whenever the vehicle’s left turn
signal is activated.
Right Side Camera:
The right side view camera (CAM2) is designed to
automatically turn on whenever the vehicle’s right
turn signal is activated.
Rearview Camera:
The rearview camera (CAM3) is designed to auto-
matically turn on whenever the vehicle is placed into
reverse gear.
Video Input:
Manually select the video input by pressing the SEL
button on the monitor until DVD appears in the display.
Note: Select any camera view manually by pressing
the SEL button on the monitor. If a camera view is
automatically activated (Example: the vehicle is in
reverse) you will not be able to manually select a dif-
ferent camera view until the vehicle taken out of
reverse.
5
PICTURE
VOLUME
BRIGHT
CONTRAST
COLOR
SHARP
HUE
SELECT
ADJUST
35
40
50
50
50
50
35
Adjusting the Volume
1. Press the MENU button on either the monitor or
remote control and the PICTURE menu screen will
be displayed.
2. With the VOLUME feature highlighted, use the
buttons on the monitor to adjust the volume. Wait
15 seconds and the menu will disappear.
1.
2.
Volume
Up
Volume
Down
Mirror/Normal Camera Image:
The camera image can be displayed as normal or mirror
image. Adjust a specific camera by pressing the MENU
button on the monitor until “OPTION” menu appears in the
display. Follow the instruction on the screen to change the
camera image. After selection has been made wait 15 sec-
onds and the menu screen will disappear.
Note: CAM1 is left side camera, CAM2 is right side
camera and CAM3 is rearview camera.
OPTION
LANG
SCALE
CAM1
CAM2
CAM3
DVD
SELECT
ADJUST
ENG
OFF
MIRROR
NORMAL
NORMAL
NORMAL