Filter
Top Products
7
Radio Operation (continued)
FM Stereo/Mono Reception:
For weaker FM stereo stations selecting mono
reception usually improves reception. To switch
from stereo to mono reception press the VOL knob
until “STEREO” appears in the display. Rotate the
VOL knob until “MONO” appears in the display.
The unit will leave feature programing after 5 sec-
onds of no button activity.
Label Side Up
10
+
5
10-
INT
RDMA-BRPT
BAND
AMS
MODE
EQ
MUTE
SEL
VOL
AM/FM Multi-Media Receiver
6
432
1
10
+
5
10-
INT
RDMA-BRPT
BAND
AMS
MODE
EQ
MUTE
SEL
VOL
AM/FM Multi-Media Receiver
6
432
1
10
+
5
10-
INT
RDMA-BRPT
AUX
OPEN
BAND
AMS
MODE
AM/FM Multi-Media Receiver
USB
6
432
1
Preset Radio Stations (continue)
Automatically Memorizing Station:
1. Select a band (AM or FM).
2. Press and hold the AMS button for two sec-
onds. The radio automatically selects strong
stations and stores them in each preset
number for the selected radio band. The
new stations replace stations already stored
in that band.
3.
After the new stations are stored into memory,
the tuner will start playing the memorized stations
each for 5 seconds. When a desired station is
reached, press the AMS button to stop scanning.
Scanning Memorized Stations:
To scan preset stations stored in the current
band press and release the AMS button. The
radio pauses for five seconds at each preset
station. When the desired station is reached,
press the AMS button again to stop scanning.
CD (Music) Disc, SD Card and USB Drive Operation
Loading a CD:
1.
Press the OPEN button to flip down the face
and to allow access to the disc slot.
2.
Insert a CD into the disc slot with the label side
up.
Inserting the disc will automatically switch
the unit to the “CD” mode.
3.
Close the unit’s face.
Ejecting a CD:
1.
Press the OPEN button to flip down the face
and to allow access to the disc slot.
2.
Press the button to eject the disc from the
unit. Remove the disc.
3.
Close the radio face.