Magnadyne S-DV424 Car Video System User Manual


 
Listening to your system04
26
En
If you have selected
Frt. Movie
or
Frt. Music
,
you will achieve best results by turning each
surround speaker about 50º towards the
closest wall. With
ExtraPower
, orient the
surround speakers in the same direction as the
front speakers (towards the listening position).
When turning, you will feel the surround
speaker snap correctly into place. Do not
force the speaker to turn past this point.
Adjusting the Advanced and Front
Surround effect level
You can emphasize or reduce the effect of the
Advanced and Front Surround modes as you
like. You can set the effect level for all modes
independently.
1 With one of the Advanced or Front
Surround modes active, press SOUND.
2 Use the
/
(cursor left/right) buttons
to select ‘Effect’.
3 Use the
/
(cursor up/down) buttons
to adjust the effect level.
The effect level can be adjusted from
10
(min)
to
90
(max).
4 Press ENTER to confirm.
Listening in stereo
You can listen to any source—stereo or
multichannel, analog or digital—in stereo.
When playing a multichannel source, stereo
sound is created by downmixing all channels
to the front left/right speakers and the
subwoofer.
Press SURROUND repeatedly until
‘Stereo’ shows in the display.
Any active Advanced or Front Surround mode
is canceled.
Listening with headphones
When headphones are connected, only the
Stereo
(default) and
Phones Surround
(virtual
surround sound for headphones) modes are
available.
When you disconnect them it reverts to the
previous mode.
With headphones connected, press
ADVANCED or FRONT SURROUND to select
‘Phones Surround’ or SURROUND to select
‘Stereo’
.
Frt. Movie / Frt. Music Extra Powe
r
50º
TEST TONE
123
ZOOM
TOP MENU
DIMMER
REPEAT
AUDIO ANGLE
RANDOM
SUBTITLE
PROGRAM
456
789
0
FOLDER–
ROOM SETUP
CLR
ENTER
FOLDER+
MENU
HOME
SETUP
SYSTEM
CLOCK
TIMER/
BASS MODE DIALOGUE
MAIN SUBSUB
SURROUND
SR+
DISPLAY
DIALOGUE CH LEVEL
ADVANCED VIRTUAL SB
MIDNIGHT
QUIET/
Home_theater.fm 26 ページ 2004年1月20日 火曜日 午後4時24分