Filter
Top Products
Other connections
12
57
En
English
Français
Deutsch
Nederlands
Italiano
Español
Switching the TV audio input from
SCART to RCA
You can set the TV audio input to RCA or
SCART.
1 Press TV.
2 Press SYSTEM SETUP.
3 Use the
/
(cursor left/right) buttons
to select ‘TV Audio?’.
4 Press ENTER.
5 Use the
/
(cursor up/down) buttons
to select SCART or RCA.
6 Press ENTER
SCART pin assignment
The diagram below shows the SCART 21-pin
connector assignment. This connector
provides the video and audio signals for
connection to a compatible color TV or
monitor.
Using this unit with a Pioneer
plasma display
If you have a Pioneer plasma display (models
PDP-504HDG and PDP-434HDG or (European
model only) PDP-504HDE and PDP-434 HDE),
you can use an SR+ cable (see note below) to
connect it to this unit and take advantage of
various convenient features, such as
automatic video input switching of the plasma
display when the input is changed.
The illustration above shows the European
model.
Pin
No.
Assignment
Pin
No.
Assignment
1 Audio R OUT 12 No
connection
2 Audio R IN 13 GND (video)
3 Audio L OUT 14 GND (video)
4 GND (audio) 15 R or C OUT
5 GND (video) 16 BLANK OUT
6 Audio L IN 17 GND (video)
7B OUT 18 GND (video)
8 Status 19 Video or Y
OUT
9 GND (video) 20 No
connection
10 No
connection
21 GND (video)
11 G OUT
Pin
No.
Assignment
Pin
No.
Assignment
AM
LOOP ANTENNA
FM
UNBAL 75Ω
IN
ANTENNA
CONTROL
AV CONNECTOR
OUT
CONTROL
Pioneer plasma display
XV-DV323/424
Media receiver
XV-DV323.book 57 ページ ２００４年１月１３日 火曜日 午後７時５７分