Filter
Top Products
5
Voltage selection
The PLS-228 is factory-set (internally) for 100V, 120V, 200V, 220V, or
240V AC mains operation @ 50 or 60Hz. Make sure that the label on
the bottom of the PLS-228 indicates the correct AC operating voltage
for your location.
PLS-228 POWER SUPPLY
WARNING:
BEFORE ATTEMPTING TO
OPERATE THIS DEVICE, REFER TO
OWNER'S MANUAL FOR PROPER
OPERATING INSTRUCTIONS AND SAFETY
PRECAUTIONS. HAZARDOUS VOLTAGE
AVAILABLE INSIDE; DISCONNECT AC~
MAINS CABLE BEFORE REMOVING COVER.
AC INPUT
OPERATING VOLTAGE:
90 – 110VAC~
105 – 125VAC~
180 – 220VAC~
210 – 240VAC~
230 – 250VAC~
~50 – 60HZ
SERIAL NO.
FUSES:
100 – 120VAC~
2A SLO–BLO 250VAC 3AB
200 – 240VAC~
1A SLO–BLO 250VAC 3AB
DESIGNED AND MANUFACTURED IN U.S.A. BY
MADRIGAL AUDIO LABORATORIES INC.
MAINS
Voltage
indication
PLS-228 bottom-panel
label
If the voltage indicated is incorrect, see your Mark Levinson dealer.
If you wish to change the AC operating voltage of the Nº28/PLS-228,
see your Mark Levinson dealer.
The Nº28/PLS-228 can be powered by a normal 15-ampere AC mains
line. If other devices are also powered from the same AC line, their
additional power consumption must be taken into account.