Filter
Top Products
34
Chapter4PowerSavingFunctions
4-3. Enabling/Disabling Automatic Brightness
Adjustment “Auto EcoView”
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness
automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1. Press
on the remote control.
The “EcoView” menu appears.
2. Select “On” or “Off” with or .
3. Press
to exit the adjustment.
Note
• As “Brightness” in the Setting menu is changed, the auto adjustment range for Auto EcoView is also changed.
4-4. Checking the power saving level
The EcoView menu allows you to check Power Reduction, CO2 Reduction, and Eco Performance Level. The
more indicators light up representing the Eco Performance Level, the higher the power saving level attained.
EcoView Menu
Auto EcoView
Power Reduction
On
Eco Performance Level
CO2 Reduction
30 W
17 g
Indicator
Procedure
1. Press
on the remote control.
The “EcoView” menu appears.
4-5. Enabling/Disabling Auto Power-OFF “Off Timer
(min)”
This function allows you to set the time to power off the monitor automatically.
Adjustable range
Disable, 30, 60, 90, 120, 150, 180
Procedure
1. Press
on the remote control.
Each time you press , the set time changes.