NEC M40 Car Satellite TV System User Manual


 
English-25
English
H RESOLUTION Adjusts the horizontal size of the image.
INPUT DVI, VGA, RGB/HV only
V RESOLUTION Adjusts the vertical size of the image.
INPUT DVI, VGA, RGB/HV only
ZOOM MODE Select the aspect ratio of the screen image.
BASE ZOOM
16:9* For input sources that have a 16:9 aspect ratio.
14:9* For input sources that have a 14:9 aspect ratio.
DYNAMIC* Expands 4:3 picture to fill the screen. Some of the image is lost due to expansion.
OFF Selecting “OFF” will display the image in a 1 by 1 pixel format. (If the input resolution is
higher than a 1920 x 1080 resolution, the image will be scaled down to fit the screen.)
CUSTOM Displays an image as large as possible without changing the aspect ration.
ZOOM Maintains the aspect ratio while zooming.
H ZOOM Amount of horizontal zoom. Can be adjusted for each BASE ZOOM setting.
V ZOOM Amount of vertical zoom. Can be adjusted for each BASE ZOOM setting.
H POS Horizontal position. Can be adjusted for each BASE ZOOM setting.
V POS Vertical position. Can be adjusted for each BASE ZOOM setting.
INPUT RESOLUTION If there is a problem with signal detection, this function forces the monitor to display the
INPUT VGA, RGB/HV only signal at the desired resolution.
If no problem is detected, the only available option will be “AUTO”.
AUTO
1024x768
1280x768
1360x768
1366x768
1440x1050
1680x1050
ADJUST RESET Resets the following settings within the ADJUST menu back to factory setting:
AUTO ADJUST, H POSITION, V POSITION, CLOCK, CLOCK PHASE, H RESOLUTION,
V RESOLUTION, ZOOM MODE, INPUT RESOLUTION.
AUDIO* BALANCE
TREBLE
BASS
PIP AUDIO Selects source of PIP audio.
AUDIO RESET Resets “AUDIO” options back to factory settings.
SCHEDULE OFF TIMER Sets the monitor to power off after a length of time.
A time between 1 to 24 hours is available.
SCHEDULE SETTING Creates a working schedule for the monitor to use.
SCHEDULE LIST List of schedules.
DATE & TIME Sets the date, time, and daylight saving region. Date & time must be set in order for the
“SCHEDULE” function to operate.
YEAR
MONTH
DAY
*: The product you purchased may not have this feature.