Filter
Top Products
English-28
FIRST DETECT When the current video input signal is not present, then the monitor searches for a video
INPUT DVI, VGA, RGB/HV only signal from the other video input port. If the video signal is present in the other port, then the
monitor switches the video source input port to the new found video source automatically.
The monitor will not look for other video signals while the current video source is present.
LAST DETECT When the monitor is displaying a signal from the current source and a new secondary source
INPUT DVI, VGA, RGB/HV only is supplied to the monitor, the monitor will automatically switch to the new video source.
When current video input signal is not present, the monitor searches for a video signal from
the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically.
VIDEO DETECT* DVD/HD or VIDEO inputs will have priority over DVI, VGA, RGB/HV. When DVD/HD or
VIDEO input signal is present the monitor will change and keep to the DVD/DH or VIDEO
input.
LONG CABLE ON/OFF Compensates for image degradation caused from using a long cable.
INPUT VGA, RGB/HV only
LONG CABLE MANUAL Manually compensates for image degradation caused from using a long cable.
INPUT VGA, RGB/HV only
RED DELAY Adjusts the phase of the red signal.
GREEN DELAY Adjusts the phase of the green signal.
BLUE DELAY Adjusts the phase of the blue signal.
RED SHARPNESS Adjusts the performance degradation of the RED signal.
GREEN SHARPNESS Adjusts the performance degradation of the GREEN signal.
BLUE SHARPNESS Adjusts the performance degradation of the BLUE signal.
SOG PEAK. Adjusts the shape of Sync on Green signal.
VIDEO EQ. Optimize the shape (Tailing) of RED, GREEN and BLUE signals.
SYNC TERMINATE Selects the terminate resistance for matching the cable impedance.
DVI MODE Selects the kind of DVI-D equipment which is connected DVI.
Select “DVI-PC” when PC or other computer equipment is connected.
Select “DVI-HD” when DVD player, which has DVI-D output, is connected.
SCAN CONVERSION Selects the IP (Interlace to Progressive) conversion function.
PROGRESSIVE Converts interlaced signals to progressive. This is the default setting.
INTERLACE Disables IP conversion. This setting is best suited for motion pictures, but increases the risk
of image retention.
SCART MODE* Input mode for devices using SCART connectors.
S-VIDEO MODE* Selects the S-Video input port function.
PRIORITY When an S-Video cable is connected to the S-Video input, it will have priority over the
composite input port.
SEPARATE The S-Video port and Composite port can be selected as independent input ports.
COLOR SYSTEM The selected Color System depends on the video format of the input signal.
INPUT VIDEO, TV only
AUTO Automatically chooses Color System setting based on input signal.
NTSC
PAL
SECAM
4.43NTSC
PAL-60
SCAN MODE* Some video formats may require scan conversion in order to best display the image.
INPUT HDMI, DVD/HD, VIDEO, TV only
OVER SCAN Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
UNDER SCAN Image size stays within the display area. The whole image is displayed on the screen.
*: The product you purchased may not have this feature.