Filter
Top Products
28
Programming to play at a specified time
The clock of this unit must be set correctly before programming the
timer. Before using the timer for listening to or recording broadcast
programs, you need to store the preset stations. (Refer to “Presetting
your favorite stations” on page 23 for information how to preset
stations.)
1. Press the TIMER button repeatedly until “WEEKDAY” or
“WEEKEND” is displayed, and press the ENTER button.
2. Press the
buttons to set the ON time, and press the EN-
TER button.
Note
When you store the ON time, the display automatically indicates
that the OFF time is one hour after the ON time you specified.
3. Press the
buttons to select the OFF time, and press the
ENTER button.
4. Press the
buttons to select the source, and press the EN-
TER button.
Each time you press the
buttons, the display changes as fol-
lows.
FM, AM, CD, CDR, TAPE
If you select “FM” or “AM”, press the
buttons again to se-
lect the preset number and press the ENTER button.
5. Press the STANDBY/ON button on the remote controller to
set the Standby mode.
Note
• Make sure that the specified source component is connected to
this unit, and that the CD-R, or cassette tape has been inserted
into the appropriate component.
1
2
3
Using the timer
ENTER
TIMER
STEREO
TIMER
W.DAY
ENTER
STEREO
TIMER
W.DAY
ENTER
4
TIMER
W.DAY
ENTER
5
STANDBY/ ON
STEREO
TIMER
W.DAY
REC
STANDBY/ON
TIMER
ENTER
TAPE
CD
TIMER
ENTER
+
10
7
8
9
0
4
5
6
2
3
1
CLOCK
CALL
CLEAR
REPEAT
MEM
SLEEP
RANDOM
MUTING
A.PRESENCE
STANDBY/ ON
INPUT
TUNER
PRESET