Filter
Top Products
29
Programming to record at a specified time
REC mode of the Timer function enables you to record a specified
source at a specified time.
To perform timer recording, you need to use a stereo cassette tape
deck that is made by ONKYO, featuring the
mark. Make sure
the unit and the recording component are correctly connected with
the
remote control cable before timer recording. (Refer to “Con-
necting the
remote control cables” on page 7.)
1. Press the TIMER button repeatedly until “REC” appears on
the display, then press the ENTER button.
2. Press the
buttons to select the day of the week when you
would like to start recording, then press the ENTER button.
You can select “NEXT” instead of the day of the week. If you do
so, recording will start at the next occurrence of the indicated
time.
3. Press the
buttons to set the ON time, and press the EN-
TER button.
Note
When you store the ON time, the display automatically indicates
that the OFF time is one hour after the ON time you specified.
4. Press the
buttons to set the OFF time, then press the
ENTER button.
5. Press the
buttons to select FM or AM, and press the EN-
TER button.
Press the
buttons again to select the preset number, then
press the ENTER button.
1
2
Using the timer
ENTER
TIMER
TIMER
REC
3
STEREO
TIMER
REC
4
STEREO
TIMER
REC
STEREO
MHz
TIMER
REC
5
ENTER
ENTER
ENTER
ENTER
TIMER
ENTER
TAPE
CD
TIMER
ENTER
+
10
7
8
9
0
4
5
6
2
3
1
CLOCK
CALL
CLEAR
REPEAT
MEM
SLEEP
RANDOM
MUTING
A.PRESENCE
STANDBY/ ON
INPUT
TUNER
PRESET