Filter
Top Products
En-15
Connecting Other Components
About Connections
• Before making any connections, read the manuals
supplied with your other components.
• Don’t connect the power cord until you’ve completed
and double-checked all connections.
Connection Color Coding
RCA-type audio connections are usually color-coded:
red and white. Use red plugs to connect right-channel
audio inputs and outputs (typically labeled “R”). Use
white plugs to connect left-channel audio inputs and
outputs (typically labeled “L”).
Push plugs in all the way to make
good connections (loose connections
can cause noise or malfunctions).
Note:
• Do not put anything on top of the CD receiver, as it
may interfere with proper ventilation.
Using a suitable cable, connect the CD receiver’s
AUDIO OUT: SUBWOOFER to the input on your
powered subwoofer.
If your subwoofer is unpowered and you’re using an
external amplifier, connect the AUDIO OUT:
SUBWOOFER to the amp’s input.
Note:
• Do not connect or disconnect the power cord while the
subwoofer is powered-on. Doing so may damage the
subwoofer. You must power-off the subwoofer before
connecting or disconnecting the power cord.
Using a suitable cable, connect the CD receiver’s LINE
IN jacks to the OUTPUT (PLAY) jacks of your cassette
tape deck, TV, or other audio playback device.
If you want to view the contents of videos from your
iPod/iPhone on your TV, connect the CD receiver’s
VIDEO OUT jack to the VIDEO IN jack of your TV or
projector.
VIDEO
IN
CD receiver
Analog audio
cable (RCA)
Powered
subwoofer
e.g., casette tape deck
TV, projector, etc.
To wall outlet
(Connector type varies
from country to country.)
Right!
Wrong!
Connecting a Powered Subwoofer
Connecting an Audio Playback
Device
Connecting a TV