Filter
Top Products
19
En
Specifications
Amplifier section General
■ Audio Inputs
■ Speaker Outputs
■ Control Terminal
Specifications and features are subject to change
without notice.
Rated Output Power
All channels: (North American)
150 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven from 20 Hz to 20 kHz, with a
maximum total harmonic distortion of
0.05% (FTC)
175 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven at 1 kHz, with a maximum total
harmonic distortion of 0.7% (FTC)
185 watts minimum continuous power
per channel, 6 ohm loads, 2 channels
driven at 1 kHz, with a maximum total
harmonic distortion of 0.1% (FTC)
(Others)
9 ch × 220 W at 6 ohms, 1 kHz, 1 ch driven
of 1 % (IEC)
Maximum Effective Output Power
(Asian)
9 ch × 280 W at 6 ohms, 1 kHz, 1 ch driven
(JEITA)
Dynamic Power
*
*
IEC60268-Short-term maximum output power
400 W (3 Ω, Front)
300 W (4 Ω, Front)
180 W (8 Ω, Front)
THD+N (Total Harmonic Distortion+Noise)
0.05 % (20 Hz - 20 kHz, half power)
Damping Factor 60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance
1 V, 47 kΩ (Unbalanced)
2 V, 22 kΩ (Balanced)
Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Unbalanced)
Signal to Noise Ratio 110 dB (Unbalanced, IHF-A)
Speaker Impedance 4 Ω - 16 Ω
Power Supply (North American)
AC 120 V, 60 Hz
(Others)
AC 220 - 240 V, 50/60 Hz
Power Consumption (North American) 11.7 A
(Others) 1050 W
No-sound Power Consumption
(North American) 80 W
(Others) 75 W
Stand-by Power Consumption
(North American) 0.2 W
(Others) 0.3 W
Dimensions (W × H × D)
435 mm × 198.5 mm × 446.5 mm
17-1/8" × 7-13/16" × 17-9/16"
Weight 22.2 kg (48.9 lbs.)
Balance Inputs 9
Unbalance Inputs 9
FL, FR, C, SL, SR, SBL, SBR, FHL/FWL, FHR/FWR
12 V Trigger In 1