Filter
Top Products
15
USING THE CONTROL PANEL
The stereo’s control panel must be in
place for the stereo to operate. When
you remove it, the display turns off
and the stereo cannot be used. This is
a simple but effective security mea-
sure.
Any stored stations remain in memory
when the control panel is removed.
INSTALLING THE
CONTROL PANEL
1. Insert the left edge of the control
panel into the left edge of the
recess. The hole in the control
panel interlocks with the tab in the
recess.
2. Gently push the right edge of the
control panel into the recess until
you hear a click.
REMOVING THE
CONTROL PANEL
1. Press
RLS
. You hear a click and
the control panel swings out.
2. Remove the control panel, then
store it in the supplied carry case.
Caution:
To keep the metal connect-
ing pins clean, do not touch the con-
necting pins in the recess or on the
back of the control panel.
(illus - show pin in recess hole)
(illus - show control panel swing)
(illus)
12-2154.fm Page 15 Wednesday, July 14, 1999 3:34 PM