Filter
Top Products
17
© 2005 Directed Electronics, all rights reserved
Three Channel Stereo/Bridged Configuration
● Channels 1/2 are configured for 2-channel stereo operation.
● Channel 1/2 lowest recommended impedance is 2W stereo.
● Channels 3/4 are configured for a single channel bridged output.
● Channel 3/4 lowest recommended impedance is 4W.
● Crossover mode, output, and gain configurations are independently adjustable
between channels 1/2 and 3/4.
● Two-channel or four-channel input can be used for this configuration. For source
unit fading, use the four-channel input mode.
● Channel 1/2 and 3/4 outputs can be configured for high-pass, low-pass, or full
range operation.
● Channel 3/4 outputs are configured for summed bridged operation for subwoofer.
SPEAKER
+
1CH
+
2CH
-
1CH
-
2CH
BRIDGE
SPEAKER
+
3CH
+
4CH
-
3CH
-
4CH
BRIDGE
CHANNEL 2
CHANNEL 1
BRIDGED