Orion Car Audio XTREME 300 Car Stereo System User Manual


 
page 31
Lowest Recommended Impedance is 2 stereo and 4 bridged mono.
RCA inputs are connected to both left and right channels
Left Phase switch set to 0°
Right Phase switch is set to 180°, Speaker polarity on the right channel must be inverted to maintain proper speaker polarity.
Gain controls must be set identically for both left and right channels.
Output must be configured for full range operation.
Passive crossover frequencies must not overlap.
WARNING: Failure to do so may result in damage to the amplifier.
For optimum performance results, we recommend the use of the ORION CSX-TMC. This passive crossover is designed for
4 satellites and a single 4 subwoofer.
Output is configured summed bridged, which is ideal for single subwoofer applications..
TUNING NOTE: The phase switches can be individually switched for improved sound quality. In the Tri-mode configuration the
left and the right phase must be set opposite from each other in order to operate correctly. The high-pass cross
over can be used as a subsonic filter with INTELLi Q. Configure the high-pass crossover for LOW frequency
range operation and set according to instructions explained in the High-pass Crossover Section in this manual.