SYSTEM PLANNING SYSTEM 2
page 13
System 2 is a two-way front / rear
boomer system. Amplifier 1 powers
front and rear separates. Amplifier 2
powers four 4 ohm subwoofers. This sys-
tem also has a RGC-1 for dashboard con-
trol of the bass level.
Amplifier 1
• Lowest recommended impedance is 2
ohms stereo
• Front and rear channels configured for
stereo operation
• Front and rear channels set for high-
pass operation
• 2ch / 4ch input selector configured for
2 channel input
Amplifier 2
• Lowest recommended impedance in 2
ohms stereo
• Front and rear channels configured for
summed stereo operation
• Front channels configured for low-pass
operation with INTELLiQ.
• Rear channel input configured from
crossover and gain output of chan-
nels 1 & 2
• RGC –1 connected to front gain point
controls bass level for entire system.
Note: INTELLiQ is a trademark feature of ORION amplifiers that maximize the performance of
any subwoofer system for information regarding the setup of INTELLiQ please refer to the
crossover section of this manual that explains INTELLiQ.
+
–
+
–
+
–
+
–
–
+
+
–
+
–
+
–
+
–
+
–
–
+
+
–
+
–
+
–
+
–
+
–
RGC-1