Panasonic CQ-C1335U Car Stereo System User Manual


 
General
[VOL] (Volume)[SOURCE] (Source)
selects a source.
[PWR] (Power)
toggles power on/off.
Power On/Off
Set your car’s ignition switch to the ACC or ON position.
Power on: Press [SOURCE] (PWR).
Power off: Hold down [SOURCE] (PWR) for
more than 1 second.
Source Selection
Press [SOURCE] to change the source.
Radio Disc Player AUX IN
Volume Adjustment
(Setting Range: 0 to 40, Default: 18)
Turn [VOL].
Mute
ON: Press [MUTE]. ( lights.)
OFF: Press [MUTE] again.
SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music type.
Press [SQ] to select the sound type (SQ) as
follows:
(FLAT) fl at frequency response:
does not emphasize any part.
(Default)
(ROCK) speedy and heavy
sound:
exaggerates bass and treble.
(POP) wide-ranged and deep
sound:
slightly emphasizes bass and
treble.
(VOCAL) clear sound:
emphasizes middle tone and
slightly emphasizes treble.
Notes:
If no operation takes place for more than 5 seconds in
the
SQ selection mode, the display returns to the regular mode.
Settings of SQ, bass and treble are infl uenced one another.
If such an infl uence causes distortion to the audio
signal,
readjust bass/treble or volume.
For further information on Bass, Treble, Balance and Fader
settings, refer to Audio Settings.
General Operations
[MUTE]
toggles mute on/off.
*[AUX] (AUX IN)
(3.5 mm
stereo)
From line output of external sound/audio
device (ex. Silicon-audio player, HDD
player, etc.)
Remote Control Sensor
*
Caution
Set the volume level to low
enough before the AUX
connection is completed.
Failure to observe this, the
loud noise may come out and
damage your speakers and your
hearing.
*AUX IN:
[SQ] (Sound Quality)
selects a sound type
(SQ).