Panasonic CQ-C1335U Car Stereo System User Manual


 
Audio Settings
[VOL]
selects a value in the audio menu.
(PUSH SEL) (Push to select)
selects items in the audio menu.
[DISP] (Display)
exits from the audio menu.
Audio menu
1
Press [VOL] (PUSH SEL) to display the audio menu display.
Note: If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjustment),
the display returns to the regular mode.
2
Press [VOL] (PUSH SEL) to select a
mode to be adjusted.
3
Turn [VOL] clockwise or counterclockwise
to adjust.
Volume
(Setting Range: 0 to 40, Default: 18)
: Up
: Down
Bass
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
: Increased
: Decreased
Treble
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
: Increased
: Decreased
Balance
(Setting Range: 15 levels each, Default CNT (center))
: Right enhanced
: Left enhanced
Fader
(Setting Range: 15 levels each, Default CNT (center))
: Front enhanced
: Rear enhanced
Notes:
• If the fader is set to front, the pre-amp. output (rear) is decreased.
• For further information on SQ (Sound Quality) settings, refer to General.
Settings of SQ, bass and treble are infl uenced one another. If such an infl uence causes distortion to the audio signal, readjust bass/treble or volume.