Filter
Top Products
22
Basic Operation (Hands-Free Kit)
This unit is designed only for receiving calls with taking
account of safety. No call can be made with this unit.
(But a
call-back call can be made.)
❑
Receiving a call
When a call comes in, the state indicator blinks rapidly.
1
Press the [Hang-on] to receive a call.
2
Adjust the volume if necessary. ( \ Operating
instructions of your head unit).
3
Press the [Hang-up] to end a call.
Note:
¡Bluetooth connection will make the battery life of mobile
phone shorter.
¡Depending upon the mobile phone, the display backlight of a
mobile phone remains on when the ignition switch is in the
ACC ON position. In this case, you should turn off the backlight
with the mobile phone (
\ Manual of your mobile phone).
¡Do not turn off the power of the Head unit during a phone
conversation. Otherwise, some mobile phones cut the conver-
sation.
¡In some cases such as the manner mode, the ring tone is dis-
abled while the ring tone is set to off.
❑
Automatic reconnection
When you get out of the car, turning off the power of the Head unit allows auto-
matic disconnection of communication between this unit and the mobile phone.
After communication is disconnected, the mobile phone can be used as usual.
When you get in the car, turning on the power of the Head unit allows automat-
ic connection of communication between this unit and the mobile phone.
(Some mobile phone models require automatic connection setting. In some
cases, connection setting is required on the selection screen appearing on the
mobile phone while connection is established.) After communication is con-
nected, the hands-free function is available.
Caution
¡Telephone conversation during driving may result in conse-
quences adverse to safety. Follow your local laws and regu-
lations.
¡Appropriately adjust the volume of incoming calls in
advance (
\ Operating instructions of your head unit).