Panasonic CQ-CB8901U Car Stereo System User Manual


 
CQ-CB8901U
23
CD Player
22
CD Player
CQ-CB8901U
Cautions:
¡This unit does not support 8 cm (3) discs.
¡Do not use irregularly shaped discs. (a page 44)
¡Do not use discs that have a seal or label attached.
¡To avoid damaging the face plate, do not push it down or
place objects on it while it is open.
¡Do not pinch your finger or hand in the face plate when the
face plate is in motion.
¡Do not insert foreign matter into the disc slots.
¡Refer to the section on “Notes on CD, CD Media (CD-ROM,
CD-R, CD-RW)” (a page 44).
¡A disc which has both CD-DA data and MP3/WMA data on it
may not be reproduced normally.
1
Press [] (OPEN) to open the face
plate.
When a disc is already loaded, the disc will automati-
cally be ejected.
2
Load a disc with the printed-side facing
up.
The face plate closes automatically, and the unit rec-
ognizes the disc and starts playing automatically,
too.
When a disc is already loaded, press [SRC]
(Source) to select the CD mode.
3
Select a desired portion.
Track selection
[7] (TRACK): Next track
[6] (TRACK): Preceding track (press twice)
Note: Hold down for fast forward/reverse.
Pause
Press [BAND] (
h
/
5
).
Press again to cancel.
SRC
CQ-CB8901U
Track number Time
lights when the disc is
loaded.
Play Mode indicators
lights when each mode is
activated.
CD-TEXT display
Notes:
¡For scrolling text, hold down [DISP] for 2 sec. or
more.
¡“NO TEXT” is displayed when there is no information
on the disc.
Random and Repeat play can be set.
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press [}] or [{] to select a mode to be
adjusted.
3
Press [BAND]
(SET) to adjust.
4
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.