Filter
Top Products
S
•H
D
B
S
•
H
D
B
S
•H
D
B
CQ-R221U
13
E
N
G
L
I
S
H
4
Manual Station Preset
ቢ
Press [BAND] to select a desired band.
ባ
Use manual or seek tuning to find a station that you want to
program into memory.
ቤ
Press and hold one of the station selector buttons 1 through 6
until the display blinks. The memory is now set for that button
on the band you have selected.
Repeat the process to set other stations for the FM1 to AM
bands.
Tuning in a Preset Station
Press any of the buttons [1] through [6] to tune in the station
preset by the above steps
ቢ
to
ቤ
.
Auto Preset Memory
Select a band, and press and hold [BAND] (APM) for more than 2
seconds.
●
The 6 strongest available stations will be automatically set in
memory on preset buttons 1 through 6.
●
Once set, the preset stations are sequentially scanned for 5
seconds.
●
Press the appropriate preset button for the station you want to
hear.
Note: The stations manually preset on the selected band will be
deleted.
Note: You can change the memory setting by repeating the above
procedure.
Preset Station Setting
Up to 24 stations can be preset in the station memory as follows;
FM1 FM2 FM3 AM
6 stations 6 stations 6 stations 6 stations
Preset Number
ቢ
ባ
ቤ
Press and hold
Press and hold
d
d
d
Caution: For safety reasons, do not attempt to program while driving.
To reduce interference during
FM broadcasts (MONO)
Press [MONO] for monaural reception in case a lot of interference
is present in an FM stereo signal or to improve the listening quality
of weak FM broadcasts. To turn it off, press [MONO] again.