Filter
Top Products
CQ-R221U
30
E
N
G
L
I
S
H
21
Specifications
GENERAL
Power Supply : 12 V DC (11 V - 16 V) Test Voltage 14.4 V, Negative ground
Maximum Power Output : 40 W x 4 channels at 400 Hz, Volume Control maximum
Tone Action : Bass ; ± 12 dB at 100 Hz
Treble; ± 12 dB at 10 kHz
Current Consumption : Less than 2 A (tape mode, 0.5 W 4-speaker)
Pre-Amp Output Voltage : 2.0 V (CD Play mode; 1kHz 0 dB)
Speaker Impedance : 4 Ω (4 - 8 Ω acceptable)
Dimensions (W x H x D) : 7" x 1-15/16" x 5-7/8" (178 x 50 x 150 mm)
Weight : 3 lbs. 8 oz. (1.6 k
g
)
AM RADIO
Frequency Range : 530 - 1,710 kHz
Useable Sensitivity : 28 dB/µV (25 µV/ S/N 20 dB)
FM STEREO RADIO
Frequency Range : 87.9 - 107.9 MHz
Useable Sensitivity : 13.2 dBf. (1.25 µV/ 75 Ω)
50 dB Quieting Sensitivity : 15.2 dBf. (1.6 µV/ 75 Ω)
Frequency Response : 30 - 15,000 Hz ±3 dB
Capture Ratio : 1.5 dB
Alternate Channel Selectivity : 75 dB
Stereo Separation : 35 dB at 1,000Hz
Image Response Ratio : 65 dB
IF Response Ratio : 100 dB
Signal/Noise Ratio : 70 dB
TAPE PLAYER
Reproduction System : 4-track, 2-program stereo
Tape Speed : 1-7/8"/sec (4.76 cm/sec)
FF/REW Time : Less than 110 sec (C-60)
Frequency Response : 35 - 14,000 Hz ±3 dB (normal)
: 35 - 17,000 Hz ±3 dB (metal)
Wow and Flutter : 0.12 % (WRMS)
Signal/Noise Ratio : 52 dB, 62 dB (Dolby B NR on)
*Above specifications comply with EIA standards.
Note:
Specifications and design are subject to modification without notice due to improvements in
technology.