Filter
Top Products
How to Use the Menu Functions
22
Screen Display
• Off
• On
Turns the screen off when you select [Off]
●
The sound is active even if the screen turns off.
●
Press any buttons (except Standby) to turn the screen on.
●
This function is useful in reducing power consumption when listening to
the sound without watching the image on the TV.
Advanced Settings
White Balance
1
R-Gain Adjusts the white balance of bright red area
G-Gain Adjusts the white balance of bright green area
B-Gain Adjusts the white balance of bright blue area
R-Cutoff Adjusts the white balance of dark red area
G-Cutoff Adjusts the white balance of dark green area
B-Cutoff Adjusts the white balance of dark blue area
Reset to
Defaults
Press the OK button to reset to the default White Balance
Gamma
1
Gamma
• 1.8 / 2.0 /
2.2 / 2.4 / 2.6
Switches the gamma curve
●
Please note that the numerical values are only reference for
adjustment.
Reset to
Defaults
Press the OK button to reset to the default Gamma
16:9 Overscan
• Off
• On
[On]: Default - Image is overscanned by ~5% beyond the edge of the
screen to hide edge video noise
[Off]: Displays image in its original size including edge video noise such
as lines, dashes, dots, etc.
●
Applicable for video signals when the TV aspect is set to [16:9]
●
Memorised separately for SD and HD channels / signals
AV Colour System
• Auto
• PAL
• SECAM
• M.NTSC
• NTSC
Selects optimum colour system based on video signals in AV mode
Colour Matrix
• SD
• HD
Available only with 480p or 576p input on video signals in a natural
colour from digital equipment connected to AV1 component or HDMI1 /
HDMI2 terminals. Select [SD] or [HD] to adjust suitable colour
parameters for [SD] (standard definition) or [HD] (high definition)
●
[SD]: Input signal is a normal TV system
●
[HD]: Input signal is a high definition system
DVI Input Setting
• Normal
• Full
Changes the black level in the image for HDMI input mode with DVI input
signal manually
●
When the DVI input signal from the external equipment, especially from
PC, is displayed, the black level may not be suitable. In this case, select
[Full].
●
The black level for HDMI input signal will be adjusted automatically.
●
For HDMI input mode with DVI input signal only
Reset to Defaults
Press the OK button to reset the present Picture Viewing Mode of the
selected input to the default settings
1 : PC input mode only
M
B
T
E
B
H
S
V
A
V
TH_L32C3KMTX_EN.indd 22TH_L32C3KMTX_EN.indd 22 3/17/2011 3:45:50 PM3/17/2011 3:45:50 PM