Panasonic TX-58AX800E Car Satellite TV System User Manual


 
- 257 -
3D
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Cannot view 3D images
Cannot register a 3D Eyewear to the TV
Has the 3D Eyewear been switched on and set to 3D mode?
Is the battery installed correctly?
Watching > 3D > 3D Eyewear - Replacing battery
Check the remaining battery level of the 3D Eyewear. (Battery status is
displayed on the screen when the 3D Eyewear is turned on.) When the
battery is running low, replace it with a new one.
Use the 3D Eyewear within approx. 3.2 m from the TV. (The range may be
shortened depending on the obstacles between the TV and the eyewear,
or the surrounding environment.)
Register again.
Watching > 3D > 3D Eyewear - Registration
Does the 3D Eyewear support Bluetooth wireless technology?
Ensure that 3D Mode Selection is set to 3D.
Watching > 3D > 3D Mode Selection
Some 3D image signals may not be automatically recognised as 3D
images. Set 3D Mode Selection (Manual) to match the picture format.
Watching > 3D > Viewing 3D
For some people, the 3D images may be difficult to see, or cannot be
seen, especially among users who have a different level of eyesight
between the left and right eyes. Take necessary measures (wearing
glasses, etc.) to correct your eyesight before use.
3D Eyewear is turned off automatically
Check that there are no obstacles between the TV and the 3D Eyewear.